Operating Instructions - Kenmore DS6001 Manual De Uso Y Cuidado

WARNING
Before charging, make sure unit is OFF.
1. Plug the charging
adapter into an
outlet. Insert the
vacuum cleaner onto
the charger base as
shown.
2. Make sure the vacuum cleaner is fully
charged before using for the first time. The
vacuum may take up to 5 hours to charge
completely if fully discharged.
CAUTION
Moving parts! To reduce the risk of personal injury,
DO NOT touch the brush roll when vacuum is on.
Contacting the brush roll while it is rotating can cut,
bruise or cause other injuries. Always turn off before
servicing. Use caution when operating near children.
CHARGING

OPERATING INSTRUCTIONS

- 8 -
3. While the vacuum is
being charged, the battery
charge indicator will be
flashing continuously until
fully charged.
Battery Charge Indicator
4. When the vacuum has reached full
charge (100%), the battery charge
indicator will remain lit for 3 seconds then
go to dormant mode with no illuminated
lights showing.
NOTE: If the battery charge indicator does
not illuminate when charging, ensure the
following:
• The vacuum cleaner is seated properly
onto the charger base.
• The charging adaptor is plugged into the
outlet properly.
• The adaptor power plug is connected
properly on the charger base.
NOTE: For improved battery performance,
always keep the vacuum cleaner on the
charger base while not in use.