Using the breast pump
Flange size
The Philips Avent single/double electric breast pump Advanced has a soft, active flange. There is only one
flange size. It gently stimulates your nipple to trigger milk flow. The flange is made of flexible silicone, fitting
nipple sizes up to 30 mm/1.18 in.
Charging the breast pump
Fully charge the battery before you use the breast pump for the first time and when the battery is low. Fully
charging the battery takes up to 4 hours. Charged battery operates approximately 3 pumping sessions.
1. Switch off the device.
Battery indicator light description
All lights are steady
on. The battery is
fully charged.
Charged battery
operates
approximately
3 pumping
sessions.*
* One session is the equivalent of 15 minutes (double electric breast pump) or 30 minutes (single electric
breast pump).
2. Insert the adapter into
the power outlet and
insert the small plug at
the other end into the
motor unit.
Two lights are
First light flashes
steady on.
slowly.
The battery is
The battery is
charged sufficiently
charged sufficiently
for maximum two
for maximum one
sessions.*
session.*
3. The battery is
charging.
First light flashes
quickly.
The battery is very
low, the device will
soon stop
operating, charging
is needed.
English
4. When the battery is
fully charged, remove
the adapter from the
power outlet and pull
the small plug out of the
motor unit.
Battery lights light
up one by one and
go out all together.
The battery is
charging.
15