Idiomas disponibles
Idiomas disponibles
9.2.6.
TEMP HIGH
This parameter defines the value in ºC which will be effective when the user selects high
temperature. The factory value is 60 ºC, although this can be edited.
Note: This value should not be increased.
9.2.7.
COOL FACTOR
After all the temperature settings have been defined, the cooling time to the end of the cycle
should be configured. The Cool Factor parameter defines the length of this cooling. The factory
setting is 0 but this can be modified.
IMPORTANT: THE COOL DOWN MINUTES ARE INCLUDED IN THE SELF-
9.2.8.
LOST BALANCE TIME
This parameter defines the time in minutes that the dryer can remain inoperative (fan not
running) before any outstanding balance is lost. The factory value is 0, with this value this
function is deactivated, and therefore the outstanding balance is never lost.
.
TEMP HIGH-
060 ºC
COOL FACTOR
001
SERVICE PROGRAMME TIME
LOST BAL. TIME
000
85
