Idiomas disponibles
Idiomas disponibles
The following table shows all the possible information displays and the conditions in which they
are displayed.
Display
Machine status
MP
END
AL-X
(2) The End / Anti-crease cycle lasts a maximum of 99 minutes. During this period, an alarm will
sound every three minutes, reminding you that the cycle has finished. After 99 minutes the
machine returns to the status: pause.
4.5. How to run a drying cycle using a standard programme
When the machine is IN PAUSE mode, press the arrows to select the required programme
number.
When the required programme is displayed, press START/STOP and the required programme
will start.
4.6. How to run a drying cycle using the values defined by the user
When the machine is IN PAUSE mode, press SELECT until 60º (Drying temperature) is displayed
flashing, and use the arrows to change the setting.
Press SELECT again until the degree of humidity, 25% is displayed flashing and use the arrows
to change the time.
Press START/STOP to start the drying cycle.
These values can be also modified while the machine is running.
Comments
In the ignition (2s)
Shows software version
End / Anti-crease
End of cycle /Anti-crease cycle
Alarm
Displays one of the alarms, see section 5
(2)
73
