LaCimbali M26 Uso E Instalacion página 61

means of the pressing disc of the grinder.
DT version.
to the preferred dose. The LED corresponding to the selected
stop automatically.
Press the push button
Dispensing, whether for dosed servings or in the continuous
dispensing mode, can be interrupted at any time by pressing
the push button .
15. Hot water dispensing
Scalding hazard! Use the appropriate insulating devices (A) to move the water and steam nozzles.
The dispensing of hot water is controlled by the economizer
which permits mixing hot water from the boiler with fresh
cold water from the mains and controls its temperature.
With this system, water quality is improved and assures
the best results for the operator.
Place the appropriate container under the hot water
dispenser (20).
Press the hot water dispensing key (11).
The programmed dose of hot water will pour from the
dispenser (20) and will stop automatically.
NOTE:
- Dispensing can be interrupted at any time by pressing
the key (11).
- The adjustment of the economizer for regulating the
delivered water temperature is made by the installing
service technician.
02_M26_UNICO_EU_2314.indd 15 02_M26_UNICO_EU_2314.indd 15
for continuous dispensing.
C
C version.
dispense.
When the desired dose is obtained, press button
to stop dispensing.
11
A
15 EN
DT
and
again
.
20
07/04/2023 12:05:04 07/04/2023 12:05:04