Hotpoint Ariston FK 61 X /HA Manual De Instrucciones página 22

The electronic
programmer*
GB
END OF
COOKING icon
DURATION
icon
DECREASE TIME
button
Setting the clock
! The clock may be set when the oven is switched off or
when it is switched on, provided that a the end time of a
cooking cycle has not been programmed previously.
After the appliance has been connected to the mains,
or after a blackout, the
digits on the DISPLAY will begin to flash.
1. Press the button several times until the
and the four digits on the display begin to flash.
2. Use the "+" and "-" buttons to adjust the time; if you
press and hold either button, the display will scroll
through the values more quickly, making it quicker and
easier to set the desired value.
3. Wait for 10 seconds or press the
finalise the setting.
Setting the timer
! This function does not interrupt cooking and does not
affect the oven; it is simply used to activate the buzzer
when the set amount of time has elapsed.
1. Press the button several times until the
and the three digits on the display begin to flash.
2. Use the "+" and "-" buttons to set the desired time;
if you press and hold either button, the display will
scroll through the values more quickly, making it
quicker and easier to set the value.
3. Wait for 10 seconds or press the
finalise the setting.
The display will then show the time as it counts down.
When this period of time has elapsed the buzzer will
be activated.
Programming cooking
! A cooking mode must be selected before
programming can take place.
Programming the cooking duration
1. Press the button several times until the
and the three digits on the DISPLAY begin to flash.
2. Use the "+" and "-" buttons to set the desired
duration; if you press and hold either button, the
display will scroll through the values more quickly,
making it quicker and easier to set the value.
22
DISPLAY
•• ••
CLOCK icon
TIMER icon
INCREASE TIME
button
SET TIME
button
icon and the four numerical
button again to
button again to
3. Wait for 10 seconds or press the
finalise the setting.
4. When the set time has elapsed, the text END
appears on the DISPLAY, the oven will stop cooking
and a buzzer sounds. Press any button to stop it.
• For example: it is 9:00 a.m. and a time of 1 hour and
15 minutes is programmed. The programme will
stop automatically at 10:15 a.m.
Setting the end time for a cooking mode
! A cooking duration must be set before the cooking
end time can be scheduled.
1. Follow steps 1 to 3 to set the duration as detailed
above.
2. Next, press the
four digits on the DISPLAY begin to flash.
3. use the "+" and "-" buttons to adjust the cooking
end time; if you press and hold either button, the
display will scroll through the values more quickly,
making it quicker and easier to set the desired value.
icon
4. Wait for 10 seconds or press the
finalise the setting.
5. When the set time has elapsed, the text END
appears on the DISPLAY, the oven will stop cooking
and a buzzer
Programming has been set when the
are illuminated. The DISPLAY shows the cooking end
time and the cooking duration alternately.
• For example: It is 9:00 a.m. and a duration of 1 hour
has been programmed. 12:30 is scheduled as the
end time. The programme will start automatically at
11:30 a.m.
icon
Cancelling a programme
To cancel a programme:
• press the
the setting you wish to cancel and the digits on the
display are no longer flashing. Press the "-" button
until the digits 00:00 appear on the display.
• Press and hold the "+" and "-" buttons; this will
cancel all the settings selected previously, including
timer settings.
icon
*
Only available in certain models.
button again to
button until the
button again to
sounds.Press any button to stop it.
and
button until the icon corresponding to
icon and the
buttons