Idiomas disponibles
Idiomas disponibles
Analogue Programmer*
START OF COOKING
GB
icon
CLOCK
icon
! All settings are only possible if the oven is connected
to the electricity mains. If the power supply fails for
longer than 10 seconds, the programmer stops: when
power is restored, the CLOCK icon flashes to indicate
that there has been a powercut and that the time
needs to be adjusted again.
If the powercut occurs during a set cooking
programme, the programmed time begins again from
the point at which it was stopped (e.g. if a cooking
duration of 1 hour is programmed and a powercut
lasting 30 minutes takes place, the programme will
finish after 1 hour and 30 minutes). In this case too, the
CLOCK icon flashes and the time will need to be reset.
MANUAL COOKING
If no programming has been activated, the oven can
be operated manually, using the SELECTOR and
THERMOSTAT knobs.
Setting the minute minder
! This function does not interrupt cooking and does not
affect the oven; it is simply used to activate the buzzer
when the set amount of time has elapsed. The minute
minder can only be used when no set programming is
underway.
To activate the minute minder, briefly press the knob 3
times until the MINUTE MINDER icon begins to flash.
The minute minder is set in exactly the same way as
the cooking end time (see corresponding paragraph).
Setting the time
To adjust the time indicated by the pointers, briefly
press the knob 4 times until the CLOCK icon begins to
flash.
Then, to increase or decrease the displayed time value
in steps of 1 minute, turn the knob clockwise or
anticlockwise; the minutes pointer moves clockwise or
anticlockwise accordingly, in steps of 1 minute.
Once 10 seconds have elapsed since the most recent
adjustment, the programmer automatically exits
adjustment mode.
*
Only available in certain models.
20
END OF COOKING
icon
TIMER knob
TIMER
icon
Programming cooking
Programming a cooking duration with immediate
start
Programming the cooking end time makes it possible
to begin cooking immediately and end automatically in
accordance with the programmed time.
To programme the cooking end time, briefly press the
knob twice until the END OF COOKING icon begins to
flash.
To increase or decrease the cooking time in steps of 1
minute, turn the knob clockwise or anticlockwise; the
minutes pointer moves clockwise or anticlockwise
accordingly, in steps of 1 minute.
The END OF COOKING icon flashes continuously for
10 seconds after the most recent rotation. The
programme can be confirmed by pressing the knob or
letting the 10 seconds elapse, provided that a cooking
time of at least 1 minute has been programmed.
The END OF COOKING icon lights up to confirm
programming has taken place successfully.
Select the desired cooking mode using the SELECTOR
knob.
The oven switches on immediately and switches off at
the set end of cooking time.
To view the set programme, briefly press and release
the knob; the pointers and icons will display the set
programme.
At the end of cooking, the END OF COOKING icon
flashes and the alarm sounds for 1 minute (to silence
it, briefly press the knob).
Turn the SELECTOR knob to the "0" position.
• For example: it is 9:00 and the cooking end time is
set to 10:15. The programme begins immediately
and stops automatically at 10:15, with a duration of
1 hour 15 minutes.
Programming a cooking duration with delayed
start
Programming the cooking start time makes it possible
to end cooking automatically in accordance with the
programmed time.
To programme the cooking start time, briefly press the
knob once until the START OF COOKING icon begins
to flash.
To increase or decrease the cooking start time in steps
of 1 minute, turn the knob clockwise or anticlockwise;
the minutes pointer moves clockwise or anticlockwise
accordingly, in steps of 1 minute.
The START OF COOKING icon flashes continuously for
10 seconds after the most recent rotation. If the knob
is not turned or pressed within this period, the pointers
automatically revert to displaying the time and the
programme is cancelled. After setting the cooking start
time (START OF COOKING icon lit steadily), pressing
the knob again will begin the cooking end time setting
process (the END OF COOKING icon begins to flash),
