BFT THALIA BT A80 Instrucciones De Instalación página 49

Logic Definition
Configuration of
safety input SAFE 2.
2 SAFE
Configuration of
safety input SAFE 10.
10 SAFE
Only with an
Configuration of
e x p a n s i o n
safety input SAFE 11.
11 SAFE
c a r d . I f
you do not
Configuration of
u s e t h e
safety input SAFE 12.
12 SAFE
e x p a n s i o n
card, leave
the default
setting (15)
Configuration of
safety input SAFE 13.
13 SAFE
Configuration of
command input IC 1.
1 IC
Configuration of
command input IC 2.
2 IC
Configuration of
command input
10IC
Only with an
e x p a n s i o n
Configuration of
card
command input
11IC
Configuration of the
1st radio channel
1ch
command
Configuration of the
2nd radio channel
2ch
command
Configuration of the
3rd radio channel
3ch
command
Configuration of the
4th radio channel
4ch
command
Configuration of
1AUX
AUX 1 output. 20-21
Configuration of
AUX 2 output.
2AUX
Configuration of
AUX 10 output.
10AUX
Only with an
expansion card
Configuration of
AUX 11 output.
11AUX
Lock type.
LOCK
INSTALLATION MANUAL
Cross out
Default setting
used
4
5
6
7
6
74
8
9
10
15
77 11
15
12
78
15
13
79
14
15
80
15
0
1
0
2
61
3
4
4
62
5
2
IC 10.
64
6
3
IC 11.
65
0
0 1
2
3
9
4
5
6
2 7
8
9
10
11
5
12
0
6
1
2
0
3
26-27
4
5
3
6
22-23
7
8
9
10
11
1 12
24-25
13
14
15
16
0
1
2
28-29 0
3
4
Input configured as Phot cl (photocell active during closing only).
Input configured as Phot cl test (tested photocell active during closing only).
Input configured as Bar, safety edge.
Input configured as Bar, tested safety edge.
Input configured as Bar 8k2. (Inactive on SAFE 2,11,13).
Input configured as Bar OP, safety edge with inversion active only while opening. If while closing, the move-
ment stops.
Input configured as Bar OP TEST, safety edge tested with inversion active only while opening. If while closing,
the movement stops.
Input configured as Bar OP 8k2, safety edge with inversion active only while opening. If while closing, the
movement stops. (Inactive on SAFE 2,11,13).
Input configured as Bar CL, safety edge with inversion active only while closing. If while opening, the move-
ment stops.
Input configured as Bar CL TEST, safety edge tested with inversion active only while closing. If while opening,
the movement stops.
Input configured as Bar CL 8k2, safety edge with inversion active only while closing. If while opening, the
movement stops. (Inactive onSAFE 2,11,13).
Input configured as deactivated.
To be used without the expansion card.
(Not active on Safe 1,2).
Input configured as Start E.
Input configured as Start I.
Input configured as Open.
Input configured as Close.
Input configured as Ped.
Input configured as Timer.
Input configured as Timer Pedestrian.
Radio control configured as START E.
Radio control configured as Start I.
Radio control configured as Open.
Radio control configured as Close
Radio control configured as Ped
Radio control configured as STOP
Radio control configured as AUX1 **
Not used
Radio control configured as AUX11 ** (only with an expansion card)
Radio control configured as AUX2 **
Radio control configured as EXPO1 **
Radio control configured as EXPO2 **
Control configured as COURTESY LIGHT
The command enables the light with bi-stable logic. At least one auxiliary output must be set as a courtesy
light
Output configured as a monostable radio channel
Output configured as SCA, gate open light.
Output configured as Courtesy Light command.
Output configured as Zone Light command.
Output configured as Stair Light
Output configured as Alarm
Output configured as Flashing light
Not used
Not used
Output configured as Maintenance
Output configured as Flashing Light and Maintenance.
Not used
Not used
Output configured as closed Gate Status
Output configured as a Bistable radio channel
Output configured as a Timed radio channel
Output configured as open Gate Status
Output configured for 12V snap-action electric lock.
Output configured for 12V magnet electric lock. Max.0.5A
Power Down is not active with this setting
Output configured for 24V snap-action electric lock.
Output configured for 24V magnet electric lock. Max.0.25A
Power Down is not active with this setting
Traction lock: active throughout the manoeuvre.
Max.: 1 A for 1S, 0.2 A for the rest of the manoeuvre.
Optional extras
THALIA BT A80 -
49