Charging The Batteries - Pulsar THERMION XM38 Guia De Inicio Rapido

Mounting on the weapon
The Thermion riflescope must be properly mounted on the rifle to ensure
accurate shooting.
The riflescope is fixed using the mount, which is purchased separately
according to the type of gun. Use only high-quality mounts and rings that are
designed specifically for your gun.
The scope should be set as low as possible but should not come into contact
with the barrel or receiver.
Before securing the fastening rings, ensure that the riflescope provides the
necessary distancing of the exit pupil and enables you to see the full field of vision.

Charging the batteries

Thermion thermal imaging riflescopes come with a built-in rechargeable
lithium-ion Battery Pack APS3 with a capacity of 3200 mAh and a removable
rechargeable lithium-ion APS2 Battery Pack with a capacity of 2000 mAh. The
batteries should be charged before first use.
• Open the microUSB cover (9) by
turning it counter clockwise.
• Attach the microUSB plug of the USB
cable (16) to the microUSB socket (10)
in the body of the riflescope.
• Attach the second plug of the USB
cable (16) to the USB port on the
mains adapter (17). Plug the device
into a 100–240 V power outlet (18).
WARNING. When charging batteries via
the microUSB connector (10) in the body
casing of the riflescope, the built-in APS3
Battery Pack is the first to be charged.
Once it is fully charged, the removeable
APS2 Battery Pack begins charging. When
the device is in use, power consumption
occurs in reverse order.
The rechargeable lithium-ion APS2
Battery Pack may be recharged using the APS* charger.
• Fully insert the rechargeable APS2* Battery Pack (8) supplied with your
device, or purchased separately, along the guide rail into the APS charger
slot (13).
• Point A on the battery and Point B on the charger should be aligned.
• Two batteries** can be charged at the same time – a second slot is provided
for this.
• Attach the microUSB plug of the USB cable (16) to the socket (14) of the
battery charger (13). Plug the adapter into a 100–240 V power outlet (18).
3
ENGLISH
Power
17 outlet
Charger
USB cable
16
Micro-USB
10
connector
9
Micro-USB
slot cap
18