Using The Rechargeable Battery; Button Operation - Pulsar AXION XM30 Instrucciones De Operación

COMPONENTS AND CONTROLS
1. Eyepiece dioptre adjustment ring
2. Down/Rec button
3. Menu button
4. Up/Zoom button
5. On/Calibration ON button
6. Lens focus ring
7. Lens cap
8. MicroUSB connector
9. Battery release button
LED indicator displaying current status of the device
LED Indicator Operating Mode
Device is powered on
Device on / video recording
Device on / battery charge <10%
Device on / video recording / battery charge <10%

BUTTON OPERATION

6 5 4 3 2 1
Fig.
1
LED indicator
7 9 8

USING THE RECHARGEABLE BATTERY

AXION thermal imagers are supplied with a
rechargeable APS3 Lithium-ion Battery Pack which
enables the thermal imager to be used for up to 3
hours. The battery should be charged before first use.
Charging the battery
Option 1 (Fig.2) :
Install the battery (10) into its slot on the instrument
џ
case (14) by aligning the icons to form a 'dot' on the
device and the battery. (see Fig. 4).
Attach a USB cable (15) to the microUSB connector
џ
(8) on the device.
Connect the other end of the USB cable (15) to the
џ
mains charger (16) or to a USB socket connected to
another power source with rated output of 5V or less.
Connect the mains charger (16) to the mains power
џ
supply.
Note: The PB8I* Power Bank may be used as a charger
(see Item 7).
Option 2 (Fig.3) :
Insert the rechargeable battery (10) supplied with
џ
your device, or purchased separately, fully along the
guide rail into the APS charger slot (11).
Point A on the battery and Point B on the charger
џ
should be aligned.
Two batteries can be charged at the same time – a
џ
second slot is provided for this.
Attach the microUSB plug on the USB cable (15) to
џ
the microUSB connector on the mains device (16). Plug
the device into a 100–240V power outlet (17).
Attach the second plug of the microUSB cable to the
џ
socket (12) of the mains charger (11).
Attention! AXION thermal imagers require a licence
when exported outside your country.
The LED indicator (13) will light up.
џ
2