Getting Started - Pulsar THERMION XM38 Guia De Inicio Rapido

ENGLISH

Getting started

Turning on and image setup
• Remove the lens cover (12). Turn the unit on with a short press of the ON button (3).
• Adjust the resolution of the icons on the display by rotating the diopter
adjustment ring on the eyepiece (2).
• Rotate the lens focus ring to focus on the object being observed (11).
• Select the desired calibration mode in the main menu: Manual (M), Semi-
automatic (SA) or Automatic (A).
• Calibrate the image with a short press of the ON button (3) (where calibration
mode SA or M has been selected). Close the lens cap during manual calibration.
• Adjust the brightness, display contrast, and smooth digital zoom using the
Controller (6).
• Turn the unit off with a long press of the ON button (3).
10
Micro-USB
connector
1
ENGLISH
ZOOM button
9
Micro-USB
slot cap
11
Lens focus ring
12 Lens cap
Eyeshade
Eyepiece diopter
2
adjustment ring
4
REC button
5
7
Battery
slot cap
Controller
6
1
3
ON button
8
Battery
APS2