Mounting the electronic workshop torque tester
!
In order to work with the electronic torque tester, it must first be
firmly attached to a solid base. The foundation must be extremely
sturdy, such as a fitted worktop. The thickness of the worktop must
be between 30 and 50 mm.
For horizontal fixing, use the M 12 x 120, 8.8 Allen-head screws
in accordance with DIN ISO 912 as supplied and
for vertical fixing use only the M 12 x 220, 8.8 Allen-head
screws in accordance with DIN ISO 912 as supplied.
CAUTION
Risk of injury due to incorrect fastening
of the electronic workshop tester.
Make sure that the electronic workshop
tester is fastened sufficiently.
Fasten the electronic workshop tester
only at the holes intended for this.
Fasten the electronic workshop tester
using the specified bolts only.
29
