1
1.5 m jack cable for connecting the display unit to the transducer if the stand is
used, Order no. 7751.
2
Spiral lead for connecting the display unit to the transducer, Order no. 7752
3
Display unit and holder, Order no. 7750
4
Attachment set:
two retaining screws M 12 x 220, 8.8 to DIN ISO 912
two retaining screws M 12 x 120, 8.8 to DIN ISO 912
two M 12 nuts
two U 13 washers
5
Aluminium mounting block
6
Transducer, Order no. 7721-1
7
Mains adaptor (110 V – 230 V AC) with lead for connecting to the display unit,
Order no. 7760
8
Stand
Operating Instructions, Code 91979782
21
