The torque wrench or torque screwdriver should trip at exactly the
preset torque value.
To delete the First Peak and largest torque to date, press
"Clear".
In the "First Peak" mode, it is not necessary to press the
"Clear" button. These peak readings will be automatically
deleted as soon as you release pressure on the transducer
and then apply new pressure.
Compare the readings to see if the torque wrench or torque
screwdriver trips at exactly the value shown on the display
unit.
If you note deviations from the correct value, adjust your torque
wrench or torque screwdriver as described in the Operating
Instructions provided with it and then retest the torque wrench or
torque screwdriver.
!
WA RN IN G
Accidents possible due to incorrect
torque with incorrectly adjusted torque
wrenches.
Do not use torque wrenches with
incorrect values.
Adjust the torque wrench properly prior
to further use.
59
