WEG CFW700 Serie Manual Del Usuario página 39

Keypad (HMI) and Basic Programming
P1012 - PID Process Variable
Adjustable 0.0 to 3000.0
Range:
Properties:
ro
Access Groups
SPLC
via HMI:
Description:
Read only parameter that presents, in the wxy.z form without engineering unit, the value of
the process variable of the PID Controller according to the scale defined at P1018.
P1013 - PID Controller Output
Adjustable 0.0 to 100.0 %
Range:
Properties: ro
Access Groups SPLC
via HMI:
Description:
Read only parameter that presents, in percentage (%), the PID Controller output value.
P1016 - PID Controller Setpoint Selection
Adjustable 0 = HMI
Range:
1 = AIx
2 = Serial/USB
3 = CO/DN/DP
Properties: ro
Access Groups SPLC
via HMI:
Description:
It defines the origin source of the control setpoint of the PID Controller.
Notes:
"HMI" means that the control setpoint of the PID Controller will be the the value of of P1025
„
parameter.
"AI" means that the control setpoint of the PID Controller will come from an analog input. It
„
is necessary to set P0231 (AI1) or P0236 (AI2) to 5 = Function 1 of the Application in order to
enable its operation. The following alarm message will be displayed in case it is not properly
done: "A0770: Set AI1 or AI2 for Function 1 of the Application".
"Serial/USB" means that the control setpoint of the PID Controller will be the value of P0683
„
proportionally referenced to the percentage value with one decimal point, i.e., 100.0 %
corresponds to 1000 in P0683.
34 | CFW700
Factory -
Setting:
Factory -
Setting:
Factory 0
Setting: