Hilti VC 20-UM Manual Original página 23

Ocultar thumbs Ver también para VC 20-UM:
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 78
2.3 The items supplied as standard include:
1 Appliance with filter element
1 Suction hose complete with hose
connector, hose sleeve and tapered
adapter
1 PE VC 20 plastic dust bag
1 Paper dust bag VC 40
1 Operating instructions
2.4 Using extension cords
Use only extension cords of a type approved for the application and with conductors of adequate
gauge. The appliance may otherwise lose performance and the extension cord may overheat.
Check the extension cord for damage at regular intervals. Replace damaged extension cords.
Recommended minimum conductor cross section and max. cord length for operating the
VC 20/40 in conjunction with an electric tool plugged into the built-in power outlet:
Conductor cross section
Mains voltage 110V
Mains voltage 220-240 V
Recommended minimum cross section and max. cord length for the VC 20/40:
Conductor cross section
Mains voltage 100V
Mains voltage 110V
Use only extension cords equipped with an earth conductor.
Do not use extension cords with 1.25 mm² or 2 mm² conductor cross sections.
2.5 Using extension cords outdoors
When working outdoors, use only extension cords that are approved and correspondingly marked
for this application.
2.6 Using a generator or transformer
This appliance may be powered by a generator or transformer when the following conditions
are fulfilled: The unit must provide a power output in watts of at least twice the maximum value
printed on the type identification plate on the power tool or appliance. The operating voltage
must remain within +5% and -15% of the rated voltage at all times, frequency must be in the 50
– 60 Hz range and never above 65 Hz, and the unit must be equipped with automatic voltage
regulation and starting boost.
Never operate other power tools or appliances from the generator or transformer at the same
time. Switching other power tools or appliances on and off may cause undervoltage and / or
overvoltage peaks, resulting in damage to the power tool or appliance.
2.7 Use of accessories
Accessories
PE VC 20/40 plastic dust bag
VC 20/ VC 40 paper dust bag
VC 20/40 filter fleece
1.5 mm²
2.5 mm²
Not recommended
25 m
30 m
50 m
1.5 mm²
2.5 mm²
Not recommended
Not recommended
30 m
50 m
Type of use
Wet and dry
Wood dusts
Dry
en
3.5 mm²
Not recommended
Not recommended
3.5 mm²
75 m
Not recommended
23
loading

Este manual también es adecuado para:

Vc 20-uVc 40-uVc 40-um