LZB33-L-AR019-11 ATEX
• Ensure the tool is at a complete stop before removing
work.
• Always fit start, stop and emergency stop controls to the
machine into which the motor/torque motor is incorpo-
rated.
Noise hazards
• High sound levels can cause permanent hearing loss and
other problems such as tinnitus. Use hearing protection
as recommended by your employer or occupational
health and safety regulations.
• To prevent unnecessary increases in noise levels operate
and maintain the tool, and select, maintain and replace
the accessories and consumables, in accordance with this
instruction manual.
Workplace hazards
• Slip/Trip/Fall is a major cause of serious injury or death.
Be aware of excess hose left on the walking or work sur-
face.
• Avoid inhaling dust or fumes or handling debris from the
work process which can cause ill health (for example,
cancer, birth defects, asthma and/or dermatitis). Use dust
extraction and wear respiratory protective equipment
when working with materials which produce airborne
particles.
• Some dust created by power sanding, sawing, grinding,
drilling and other construction activities contains chemi-
cals known to the State of California to cause cancer and
birth defects or other reproductive harm. Some examples
of these chemicals are:
• Lead from lead based paints
• Crystalline silica bricks and cement and other ma-
sonry products
• Arsenic and chromium from chemically-treated rub-
ber
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your ex-
posure to these chemicals: work in a well ventilated area,
and work with approved safety equipment, such as dust
masks that are specially designed to filter out micro-
scopic particles.
• Proceed with care in unfamiliar surroundings. Be aware
of potential hazards created by your work activity. This
tool is not insulated from coming into contact with elec-
tric power sources.
DO NOT DISCARD – GIVE TO USER
Signs and stickers
The product is fitted with signs and stickers containing im-
portant information about personal safety and product main-
tenance. The signs and stickers shall always be easy to read.
New signs and stickers can be ordered by using the spare
parts list.
© Atlas Copco Industrial Technique AB - 9836 7192 00
ATEX Certification Information
ATEX Code Definition
The ATEX code is:
Ex II 2 G Ex h IIC T6 Gb
Ex II 2 D Ex h IIIC T85°C Db
°C ≤ Ta ≤ 40 °C
Description
Value
Equipment group
II
Equipment category
2
Group II
Atmosphere
G
D
Safety design
h
Gas group
IIC
IIB
Dust group
IIIC
Max surface tem-
perature in Gas at-
mosphere
Max surface tem-
perature in Dust at-
mosphere
Special restriction,
X
for example ambi-
ent temperature
range.
Temperatures
• The maximum surrounding temperature for which the
certification is valid is 40°C.
Safety Information
Definition
Surface Industry
High level of pro-
tection
• zone 1 (gas)
• zone 2 (gas)
• zone 21 (dust)
• zone 22 (dust)
Atmosphere con-
taining Gas, Va-
pors or Mist
Atmosphere con-
taining Dust
Mechanical prod-
uct
Hydrogene/ Acety-
lene
Ethylene
Surface com-
bustible dust
T1 = 450°C
T2 = 300°C
T3 = 200°C
T4 = 135°C
T5 = 100°C
T6 = 85°C
Example tempera-
tures:
T85°C
T110°C
T120°C
T125°C
T240°C
7
