Idiomas disponibles
Idiomas disponibles
Preparing for use
Cleaning
Washing in sink
-
Mild dishwashing liquid
-
High quality drinking water
-
Soft brush or clean dish towel
-
Clean sink or bowl
The motor unit, the silicone tube, cap and the adapter do not require
cleaning, as they do not come into contact with breast milk. Clean all parts
listed in section 'Cleanable parts' before (first) use. Also clean these parts
after each subsequent use.
Caution: Never put the motor unit or the adapter in water or in a
dishwasher, as this causes permanent damage to these parts.
Cleanable parts
Clean the following parts before (first) use and after each subsequent use:
Breast pump parts:
-
Silicone diaphragm
-
Pump body
-
Massage cushion
-
White valve
-
Cover
-
Power cushion (not included in SCF334/25 and SCD223/10)
Bottle parts:
-
Philips Avent Natural bottle
-
Dome cap
-
Screw ring
-
Nipple
-
Sealing disc
Accessories (please refer to general description on page 8):
-
Philips Avent storage cup
-
Philips Avent storage cup adapter
-
Manual breast pump converter
-
Handle
-
Silicone diaphragm with stem
Supplies needed for cleaning:
Warning: Do not use antibacterial or abrasive cleaning agents when you
are cleaning.
1 Disassemble the breast pump, bottle and storage cup completely.
Also remove the white valve from the breast pump.
Caution: Be careful when you remove the white valve and when you clean it.
If it gets damaged, your breast pump does not function properly. To remove
the white valve, gently pull at the ribbed tab on the side of the valve.
2 Wash the parts in the sink or dishwasher.
Washing in dishwasher
-
Mild dishwasher liquid/tablet
-
High quality drinking water
English
11
