Idiomas disponibles
Idiomas disponibles
English
12
Disinfection (optional)
-
A household pot
-
High quality drinking water
5 min.
Find the best cushion for you
Washing in sink: Soak all separated parts for 5 minutes in hot water with
some mild dishwashing liquid. Clean all parts with a soft brush or clean
dish towel and then rinse them thoroughly.
Washing in dishwasher: Clean the parts, except the motor unit, the silicone
tube and cap and the adapter, in the dishwasher (on the top rack only).
Note: To clean the valve, rub it gently between your fingers in warm
water with some washing-up liquid. Do not insert objects into the valve,
as this may cause damage.
After cleaning, if you also want to disinfect, you can boil the parts in water in
a household pot.
Supplies needed for disinfection:
Disinfect the parts in the following way:
Fill a household pot with enough water to cover all parts. Bring the water
to boil. Place the parts in the household pot and boil them for 5 minutes.
During disinfection with boiling water, prevent the bottle or other parts
from touching the side of the pan. This can cause irreversible product
deformation or damage that Philips cannot be held liable for.
Allow water to cool and gently remove the parts from the water. Place the
parts neatly on a clean paper towel or in a clean drying rack and allow them
to air dry. Avoid using cloth towels to dry the parts because they can carry
germs and bacteria that are harmful to your baby.
Expressing breast milk should be comfortable. Therefore we offer 3 soft
flexible cushions: a 19.5 mm massage cushion, a 25 mm massage cushion
(supplied with your breast pump) and a 27 mm power cushion (supplied
with your breast pump*).
For optimal comfort and performance, you should choose the optimal
cushion for your nipples.
*Not included in SCF334/25 and SCD223/10.
