English
10
Caution
Preparing for use
Cleaning
Warnings to avoid breast and nipple problems and pain:
-
Do not attempt to remove the pump body from your breast while under
vacuum. Turn off the appliance and break the seal between your breast
and the pump funnel with your finger. Remove the pump from your
breast.
-
Never use the breast pump while you are sleepy or drowsy to avoid lack
of attention during use.
-
Always turn off the breast pump before you remove the pump body from
your breast to release the vacuum.
-
Never use any accessories or parts from other manufacturers or that
Philips Avent does not specifically recommend. This could lead to
improper working of the appliance and could influence Electromagnetic
Compatibility (EMC). If you use such accessories or parts, your warranty
becomes invalid.
-
Do not continue pumping for more than five minutes at a time if you do
not succeed in expressing any milk. Try to express at another time during
the day.
-
If the process becomes very uncomfortable or painful, stop using the
pump and consult your breastfeeding advisor.
-
If the pressure generated is uncomfortable or causes pain, turn off the
appliance, break the seal between the breast and the pump body with
your finger and remove the pump from your breast.
-
Never drop or insert any foreign object into any opening.
Caution to prevent damage to and malfunctioning of the product:
-
Prevent the adapter and motor unit from coming into contact with water.
-
Keep the adapter and the silicone tubes away from heated surfaces to
avoid overheating and deformation of these parts.
-
Never put the motor unit or the adapter in water or in a dishwasher.
-
Although the breast pump is compliant with applicable EMC directives,
it may still be susceptible to excessive emissions and/or may interfere
with other equipment. A consequence can be that the breast pump turns
off or goes into error mode. To prevent interference, keep other electric
equipment away from the breast pump during expressing (see 'Technical
information').
-
There are no user serviceable parts inside the motor unit of the breast
pump. No modification of equipment is allowed. If you do, your warranty
becomes invalid.
The motor unit, the silicone tube, cap and the adapter do not require
cleaning, as they do not come into contact with breast milk. Clean all parts
listed in section 'Cleanable parts' before (first) use. Also clean these parts
after each subsequent.