Bioventus EXOGEN Guia Del Usuario página 11

If You Have a Cast
1. Your cast will have a plastic port with cap
built into it.
Add Gel and Place Transducer
Note: Some patients have experienced mild skin irritation caused by skin sensitivity to the gel. If you feel
your skin is sensitive to the gel, you may change the gel to mineral oil lubricant for skin or glycerin.
Add gel on the transducer every time you treat your fracture.
1. Open the cap on the gel bottle.
2. Hold the transducer so the cord is down
and the smooth side of the transducer is up.
3. Apply a dime size amount of ultrasound
gel on the smooth side of the transducer.
Spread the gel over the entire face of the
transducer.
2. Use 2 fingers to squeeze the cap tabs
together to open the cap.
4. Put the transducer, gel side down, into the
port. The gel will be touching the skin over
your treatment site.
3. Pull out the round felt plug inside the open-
ing.
5. Align the cord coming out of the transducer
with the notch in the cap. Snap the cap shut
on the strap or the cast.
6. Replace the cap on the gel bottle.
» Continue to "First Use"
or "Start Treatment"
8