Idiomas disponibles
Idiomas disponibles
pressing the start/stop button (8) or turn the thermostat dials
(11 and 12) to the off position.
Please note: the appliance will turn off automatically
after 90 minutes of operation.
Select the temperature scale
The temperature can be displayed in °C or °F. To change the
temperature unit of measure press both "+" and "-" button
(9 - 10) for some seconds.
Waffle mode (only for model CG7044)
-
Insert the waffle plates (13c/13d) as shown in
fig.1. Please note that in this case the plates are not
interchangeable and the position of each plate must be
as shown in figure 8.
13c
13d
-
Adjust the lower thermostat dial to 190°C and the
upper dial to 200°C and press the start/stop button.
-
The appliance starts the preheating phase. When the
thermostat reaches the required temperature, the
appliance emits a beep, and is ready to use. "READY"
appears on the display.
-
Lightly grease the plates with melted butter
-
Pour a measure into the cavities in the plate.
-
Spread the batter slightly and close the appliance.
-
Cook according to the time indicated in the recipes.
If you set the timer, three beeps will sound at the end of
the cooking cycle, the timer will disappear and "END"
will appear on the display. To cook additional waffles,
simply add batter to the lower waffle plate and follow
the above steps. At the end of the last waffle press the
"start/stop" button to switch off the appliance.
Important! do not use metal tools when removing
the waffle from the waffle plates as they may scratch the
non-stick surface.
CLEANING AND MAINTENANCE
User maintenance
-
Never use metal cleaning tools which could scratch the
non-stick plates. Use wood or heat-resistant plastic
tools.
-
Never leave plastic tools in contact with the hot plates.
-
Between cooking one food and the next, remove food
residues through the grease drain hole and collect them
in the grease tray, then clean with kitchen paper and
move on to the next cooking operation.
-
Before cleaning the appliance, always leave the
appliance to cool down for at least 30 minutes.
Cleaning and care
Please note: Before cleaning the appliance, make
sure it has cooled down completely.
At the end of cooking, turn the appliance OFF and unplug
from the mains. Leave the appliance to cool down for at
least 30 minutes. Remove any food residues from the plates.
Empty the grease tray. The grease tray can be washed by
hand or in the dishwasher.
Press the plate release buttons (3) to remove the plates from
the appliance. Before touching them, make sure they have
cooled down completely. The cooking plates can be cleaned
in dishwasher although frequent washing in a dishwasher
could reduce the properties of the coating. You are therefore
recommended to clean the outside of the cooking plate
with a soft sponge or cloth dampened with water and mild
detergent.
Do not use metal tools to clean the plates.
TECHNICAL CHARACTERISTICS
Supply voltage
Absorbed power
27
220-240 V ~ 50-60Hz
2000W
1600W (WAFFLE)
