Hilti PR 2-HS A12 Manual De Instrucciones Original página 13

Maximum relative humidity
Indicator range, distance from zero
Laser plane display range
Length of the detection area
Center indication from top edge of casing
Time without detection before automatic power off
Drop test height in the PRA 83 laser receiver holder
(under standard ambient conditions in accordance with
MIL­STD­810G)
Operating temperature
Storage temperature
Weight (including batteries)
Protection class in accordance with IEC 60529
5 Operating the rotating laser
5.1 Handling the laser and battery correctly
The type B12 battery has no protection class. Do not expose the battery to rain or wet conditions.
In accordance with the Hilti instructions, the battery may be used only with the associated product
and must be inserted in the battery compartment for this purpose.
1. Fig. 1: Working in horizontal mode.
2. Fig. 2: In inclined plane mode, the laser should be lifted at the control panel side.
3. Fig. 3: Laying down or transporting in an inclined position.
▶ Hold the laser so that the battery compartment does NOT face upwards, so that no moisture can
enter.
5.2 Inserting / removing the battery
CAUTION
Electrical hazard. Dirty contacts may cause a short circuit.
▶ Check that the contacts on the battery and on the tool are free from foreign objects before inserting the
battery.
CAUTION
Risk of injury. If the battery is not fitted correctly it may drop out and fall.
▶ Check that the battery is securely seated in the tool so that it cannot drop out and fall, thereby presenting
a hazard to other persons.
1. Push the battery in until it engages securely.
▶ The laser is ready to switch on.
2. Press the release button and hold it in this position.
3. Pull the battery out.
5.3 Switching the laser on and working in the horizontal plane
Check the accuracy of the laser tool before using it for important tasks, especially if it has been
dropped or subjected to unusual influences or impacts etc.
*2131237*
5
6
2131237
80 %
±2.0 in
(±52 mm)
±0.02 in
(±0.5 mm)
≤ 4.7 in
(≤ 120 mm)
3.0 in
(75 mm)
15 min
6 ft - 10 in
(2 m)
−4 ℉ ... 122 ℉
(−20 ℃ ... 50 ℃)
−13 ℉ ... 140 ℉
(−25 ℃ ... 60 ℃)
0.55 lb
(0.25 kg)
IP66
7
English 7