Idiomas disponibles
Idiomas disponibles
Both heart rate monitor and chest strap use 3 volt lithium batteries of the type CR 2032.
If the battery of the heart rate monitor is weak, the low battery icon appears.
To replace the watch battery
1. Using a small screwdriver, remove the four screws that hold the back plate into position.
2. Remove the back plate and set it aside.
3. Using a thin blunt instrument, hook the release catch and lift the clip.
4. Remove the old battery.
5. Insert the new battery with the + side upwards.
6. Replace the battery clip.
7. Reset the watch by inserting a thin metal instrument into the reset hole.
8. Replace the back plate and screws.
We recommend that the battery of the heart rate monitor watch is replaced by a specialist in order to ensure that it
remains splash proof!
If the battery of the chest belt is too weak, no signals will be transmitted to the heart rate monitor watch.
To replace the chest belt battery
1. Locate the battery compartment on the back of the chest belt.
2. Using a coin twist the compartment lid counter-clockwise until it clicks out of place.
3. Remove the old battery.
4. Insert the new battery with the + side upwards.
5. Replace the battery compartment lid by twisting it clockwise until it is firmly in place.
BATTERY REPLACEMENT
6
