Sammic SmartVide 5 Manual De Instrucciones página 13

EN
to the tank.
4) Leave the machine in operation for at least 60 min.
5) Turn off and unplug the machine.
6) Carry out all the steps
7) Clean the tank with food grade soap and rinse well before reuse.
Clean the needle probe connectors
Warning
Risk of erroneous measurements due to the accumu- lation of dirt
on the needle probe connectors
– Before starting to use the probe, be sure to clean the contact connec-
tors of the needle probe.
1) Clean the Jack connector for the needle probe with a swab in the
probe hole and a cloth for the male connector, both first dampened in
isopropyl alcohol
2) Dry the two connectors with a clean swab and cloth.
3) Cover the connectors with their corresponding covers.
- 13 -