Idiomas disponibles
Idiomas disponibles
You may press the Scan/Monitor button to stop scanning at any
time.
2. You may immediately resume the scan by briefly pressing
if the radio stops on an undesired transmission.
3. You may temporarily remove that channel from the scan list by
pressing and holding
radio stops repeatedly on an undesired transmission. You may
remove more than one channel this way.
4. Turn the radio off and then turn back on, or exit and re-enter the
scanning mode by pressing Scan/Monitor to restore and remove
channel(s) to the scan list.
5. You cannot remove the "Home Channel" from the scan list.
6. In the Advanced Scan, the detected code will only be used for one
transmission. You must take note of that code, exit scan, and set
the detected code on that channel to permanently use.
Warranty Information
The authorized Motorola Solutions dealer or retailer where
you purchased your Motorola Solutions two-way radio
and/or original accessories will honour a warranty claim
and/or provide warranty service.
Please return your radio to your dealer or retailer to claim
your warranty service. Do not return your radio to Motorola
Solutions.
In order to be eligible to receive warranty service, you must
present your receipt of purchase or a comparable substitute
proof of purchase bearing the date of purchase. The
twoway radio should also clearly display the serial number.
The warranty will not apply if the type or serial numbers on
the product have been altered, deleted, removed, or made
illegible.
12
or
for 3 seconds if the
or
