Idiomas disponibles
Idiomas disponibles
2. Press
or
Menu.
3. Press
or
4. Press the PTT button or wait until time out to activate
Dual Channel Monitor. The screen will alternate between
home channel and Dual Channel Monitor channel.
5. To end Dual Channel Monitor, press
Note: If you set the same channel and Sub-Code as the current
channel, Dual Channel Monitor does not work.
Keypad Tones
You may enable or disable the keypad tones. You will hear
the key tone each time a button is pushed.
1. Press
Menu until the Keypad Tone
The current setting on/off will flash.
2. Press either
3. Press the PTT button to confirm or
set up.
Roger Tone
10
to select the channel then press
to select the Sub-Code.
Menu.
icon appears.
or
to turn on/off.
Menu to continue
You can set your radio to transmit a unique tone when you
finish transmitting. It is like saying "Roger" or "Over" to let
others know you have finished talking.
1. Press Menu until the Roger Tone icon appears. The
current setting on/off flashes.
2. Press
or
3. Press the PTT button to set or Menu to continue set up.
Keypad Lock
To avoid accidentally changing your radio settings:
1. Press and hold
Indicator icon displays.
2. You can turn the radio on and off, adjust the volume,
receive, transmit, send a call tone, send Emergency
Alert, and monitor channels when in the lock mode. All
other functions remain locked.
3. Press
Menu/Lock and hold until the Key Lock
Indicator is no longer displayed to unlock the radio.
Scanning
Use the scan function to do the following:
•
Search all channels for transmissions from unknown
parties.
to turn on or off.
Menu/Lock until the Key Lock
