Idiomas disponibles
Idiomas disponibles
2. Intended use
This ladder is a moveable work tool that can be
used in various locations.
With this ladder, small scale jobs can be carried
out at heights at which use of other work tools is
not commensurate.
This ladder may only be used as specified in these
instructions for use. Any other use is considered as
non-intended use and may lead to property damage
or even to personal injury.
The ladder is not a toy.
The manufacturer or dealer shall not assume any
liability for damage that has been caused by
improper or incorrect use.
The user must always ensure that the ladder is
suitable for the respective use; if necessary a risk
assessment must be carried out in advance.
The legislation in the country of use must be
complied with.
The standing step ladders comply with the
requirements of the European standard EN 131-4.
They are suitable for
"professional use" and "non professional use".
The highest possible load capacity of the ladder
is 150 kg.
Modifications to the ladder that are not authorised
by the manufacturer shall lead to termination of
the guarantee and warranty.
18
3. Product overview
The single-hinge joint ladder M80 is a mobile,
height-adjustable single ladder.
It offers a variable height adjustment by means
of the extendable ladder rungs and can be very
compactly collapsed for transport and storage.
The several ladder models differ from each other by
the number of ladder rungs or an additional cross-
bar for increased stability.
The technical information that is important for
each type of ladder and information that is specific
to each product are directly attached to the product
on the ladder label [ H].
[A] Extendable ladder leg
[B] Foldable ladder part
[C ] Hinge joint
(safety joint with pre-set snap-in positions)
[D] Locking clamp
[E ] ladder rung
[F ] Ladder foot
[G] Crossbar with foot
[H] Ladder label
The dimensions and weights are listed in the table
on page 142, 143.
Dimension and weight values are approximate values.
Technical modifications reserved.
