Idiomas disponibles
Idiomas disponibles
5)
BATTERY TOOL USE AND CARE
a)
Recharge only with the charger specified by
the manufacturer. A charger that is suitable for one
type of battery pack may create a risk of fire when used with
another battery pack.
b)
Use power tools only with specifically
designated battery packs. Use of any other battery
packs may create a risk of injury and fire.
c)
When battery pack is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
objects, that can make a connection from one
terminal to another. Shorting the battery terminals
together may cause burns or a fire.
d)
Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water. If
liquid contacts eyes, additionally seek medical
help. Liquid ejected from the battery may cause irritation or
burns.
e)
Do not use a battery pack or tool that is
damaged or modified. Damaged or modified batteries
may exhibit unpredictable behaviour resulting in fire, explosion
or risk of injury.
f)
Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to fire or temperature
above 130 °C may cause explosion.
g)
Follow all charging instructions and do not
charge the battery pack or tool outside the
temperature range specified in the instructions.
Charging improperly or at temperatures outside the specified
range may damage the battery and increase the risk of fire.
6)
SERVICE
a)
Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power tool is
maintained.
b)
Never service damaged battery packs. Service of
battery packs should only be performed by the manufacturer or
authorized service providers.
DRILL SAFETY
WARNINGS
1)
SAFETY INSTRUCTIONS FOR ALL
OPERATIONS
a)
Wear ear protectors when impact drilling.
Exposure to noise can cause hearing loss.
b)
Hold the power tool by insulated gripping
surfaces, when performing an operation
where the cutting accessory or fasteners may
contact hidden wiring. Cutting accessory or fasteners
contacting a "live" wire may make exposed metal parts of the
power tool "live" and could give the operator an electric shock.
2)
SAFETY INSTRUCTIONS WHEN USING LONG
DRILL BITS
a)
Never operate at higher speed than the
maximum speed rating of the drill bit. At higher
speeds, the bit is likely to bend if allowed to rotate freely without
contacting the workpiece, resulting in personal injury.
b)
Always start drilling at low speed and with the
14
bit tip in contact with the workpiece. At higher
speeds, the bit is likely to bend if allowed to rotate freely without
contacting the workpiece, resulting in personal injury.
c)
Apply pressure only in direct line with the bit
and do not apply excessive pressure. Bits can bend
causing breakage or loss of control, resulting in personal injury.
SAFETY WARNINGS FOR
BATTERY PACK
a)
Do not dismantle, open or shred cells or battery
pack.
b)
Do not short-circuit a battery pack. Do not store
battery packs haphazardly in a box or drawer
where they may short-circuit each other or be
short-circuited by conductive materials. When
battery pack is not in use, keep it away from other metal objects,
like paper clips, coins, keys, nails, screws or other small metal
objects, that can make a connection from one terminal to
another. Shorting the battery terminals together may cause burns
or a fire.
c)
Do not expose battery pack to heat or fire. Avoid
storage in direct sunlight.
d)
Do not subject battery pack to mechanical shock.
e)
In the event of battery leaking, do not allow the
liquid to come into contact with the skin or eyes.
If contact has been made, wash the affected area
with copious amounts of water and seek medical
advice.
f)
Keep battery pack clean and dry.
g)
Wipe the battery pack terminals with a clean dry
cloth if they become dirty.
h)
Battery pack needs to be charged before use.
Always refer to this instruction and use the
correct charging procedure.
i)
Do not maintain battery pack on charge when not
in use.
j)
After extended periods of storage, it may
be necessary to charge and discharge the
battery pack several times to obtain maximum
performance.
k)
Recharge only with the charger specified by
WESCO. Do not use any charger other than that
specifically provided for use with the equipment.
l)
Do not use any battery pack which is not designed
for use with the equipment.
m) Keep battery pack out of the reach of children.
n)
Retain the original product literature for future
reference.
o)
Remove the battery from the equipment when not in
use.
p)
Dispose of properly.
q)
Do not mix cells of different manufacture,
capacity, size or type within a device.
r)
Keep the battery away from microwaves and
high pressure.
EN
