TRAPP TRF 50 Manual De Instrucciones página 44

www.trapp.com.br
Belt Tensioner Start - TRF 300G
1
Merely illustrative image
The motor must be operated only if the belt tensioner's lever (1) is in the relief position, i.e., without tensioning
the belt as indicated in the image above, then, in this position turn the motor on and after it reaches its
maximum rotation, move the belt tensioner's lever in the direction as indicated in the image below moving
the motor on the mounting base and verifying if the belts will be tensioned. The belt tensioner's lever can
only be tensioned when the motor is in full operation, do not turn the motor off with the tensioner activated,
this harms the motor and makes the gasoline powered engine difficult to start.
1
Merely illustrative image
Note: When tensioning the belts as described above, do not activate the shredder's disk, turn the gasoline-powered
engine off and verify if the belts are in the pulley groove, if necessary, adjust and turn the equipment on again.
44