Idiomas disponibles
Idiomas disponibles
ENGLISH
P3
The rear panel houses all couplers for the appliance utilities and the connecting socket to
the power mains. Be careful not to damage hoses and electrical cables during the
handling.
1) Disconnect the charge and drain utilities of the tool.
2) Follow procedures A1 and A2 (removal of the front panel and of the upper cover).
3) Remove the cartridge filter to eliminate any water deposit from the circuit.
4) Disassemble from the upper fixation the gas spring after removing 3 of the 4 locking
seeger rings and then extracting the fixing pin.
5) Unscrew the 17 fixing screws.
6) Disconnect the internal silicone hoses of couplers and electrical cables of the
power socket, as well as the corrugated hose previously unloosened, from its seat.
34
Removal of the rear panel
