Idiomas disponibles
Idiomas disponibles
ENGLISH
07
P1
32
OPERATING PROCEDURES
CAUTION: RISK OF ELECTROCUTION
Unplug the tool from power supply before any intervention.
Opening of the tool front panel
The front panel houses the membrane
keypad and is internally connected by a
flat cable to the control electronic board.
The front panel also houses the display
also connected by a multi-wire cable to
the control electronic board. Be careful
not to damage cables during the
handling.
1) Unscrew the two screws located on
the lower side of the panel.
2) Lower the panel and unscrew it.
3) Disconnect the flat cable connecting
the membrane keypad and the control
board housed inside the tool
4) Disconnect the multi-wire cable
connecting the display to the control
board housed inside the tool
