Idiomas disponibles
Idiomas disponibles
ENGLISH
OPERATION PHASES
After installing the tool, open the cock connecting the charge hose and switch on the
appliance rotating the switch on the socket (H) to position – I – .
Upon the switch ON the logo and the appliance firmware version are displayed.
After some seconds the cycle selection page is shown.
Ver X.XX
With lid lifted and tool ON lift the cap
(T) for detergent refilling.
Poor detergent (the use of a funnel is
suggested) until an acoustic/visual
alarm informs that the level probe
(D)
inside the tank
reaches the MAX
level.
WARNING: Do not fill the detergent
tank with tool OFF since the level
probe (which is not power supplied),
will not be able to indicate the tank
level.
Insert the tools in to the net basket and then this in to the tank, being careful not to
create contact between the walls and the basket (any contact between tank and metal
could lead in time to breakage of the tank due to the vibrations of the ultrasounds).
Select the cycle pressing SELECT to scroll
Press START
the menu vertically
15
