Idiomas disponibles
Idiomas disponibles
ENGLISH
During the drying phase or when ventilation is ON, do not switch OFF the
appliance. In case of power cut off for any reason, immediately open the lid
to avoid any damage to the ventilation and to the appliance lid.
22
PHASE 7 : DRYING
The last phase is drying. The fan (A), generates
an air flow passing through the armored
resistance (S). Hot and dry air touches the
instruments and dries them.
The appliance sucks fresh air from the slots in
the rear area of the cover panel and ejects hot
air from side slots on the lid.
Do not obstruct the air suction and vent slots.
During the 5 last minutes of the drying phase the
resistance turns off while the fan still operates to
allow for the cooling of the resistance and of the
instruments inside the tub.
At the end of the cycle the appliance sends out
three acoustic signals and displays the end of
cycle.
15 min
