Idiomas disponibles
Idiomas disponibles
Accessories
The following items are optionally available and can
additionally be ordered from HEIDENHAIN:
Accessories
Mounting bracket for installation in
a 19-inch electrical cabinet (for one
height unit)
3.3
Installation
The product can be mounted to a countertop or installed
in a 19-inch electrical cabinet.
NOTICE
Failure of fan!
A fan failure may result in overheating of the product,
and therefore to malfunctions or destruction.
Ensure that the product may be easily accessed
during operation
Ensure proper ventilation
Ensure that the vents are free from obstructions,
maintain a distance > 15 mm and do not block the
airflow
The fan can be monitored by interrogating a
status word that can report a failure of the
fan. The temperature of the product can be
interrogated and is monitored internally.
For more information, refer to the User's
Manual for Application Development.
If the product is placed on a surface, the
included adhesive feet should be mounted in
order to prevent the product from moving.
Mounting the product on a countertop
Threaded holes in the housing bottom enable you to
secure the product with four M3 screws on a countertop.
For the hole locations, see "K", Page 136.
HEIDENHAIN | EIB 700 | 07/2018
Installing the product in a 19-inch electrical cabinet
(optional)
The product can be installed in a 19-inch electrical cabinet
by using a mounting bracket (for information on the
mounting attitude, see "F" on the front fold-out page).
ID
A height unit is required for the installation. For
671144-01
information on ordering the mounting bracket, see
"Accessories", Page 25.
Remove the adhesive feet from the product, if
applicable.
Fasten the product to the mounting bracket using four
M3 x 4 screws. The screws are not included in the
items supplied.
For the hole locations, see "K", Page 136.
Insert the mounting bracket with the product in the
electrical cabinet and fasten it using four screws.
Damage due to improper screws
Damage can be caused to the product by using
improper screws for fastening.
Use only the specified screws
Two products fit next to each other on a
mounting bracket.
NOTICE
25
