Tabla de contenido
Pram Body
(1) ASSEMBLY OF THE PRAM BODY
1.1 To erect the Pram body pull the bar using the easy pull handle along the bottom of the Pram body towards the
plastic stops. Repeat both in the foot end and the head end.
1.2 Press into place the two press studs on the easy pull handle on the bottom of the pram body. Repeat both in the foot
end and the head end.
WARNING Before using the Pram body ensure that the four press studs are fastened to the bottom of the
Pram body and the Pram body frame is held firmly in place.
1.3 Remove the mattress from the plastic bag (discard safely). The bottom of the Pram body is made of wood.
Insert the mattress.
WARNING Do not use additional mattresses in the Pram body. Use only the Emmaljunga original mattress that
comes with the pram.
WARNING Risk of suffocation. Do not let children play with plastic bags.
(2) ASSEMBLY / USE OF HOOD
2.1 Insert the hood into the Pram body frame.
Please note: If the hood moves up and down on the frame this can cause scratches. Ensure the frame is free from
dust and dirt.
WARNING Ensure that children are kept away from all moving parts of the pram to avoid risk of injury.
2.2 Close the zipper between the hood and the seat unit. Make sure the zip is closed all the way.
2.3 Fold the fabric around the frame.
2.4 Fold the fabric upwards to open the ventilation and UV/insect net.
(3) ADJUST THE HOOD
3.1 Pull the hood gently forward or backward to the desired position.
(4) ATTACH THE PRAM BODY TO THE CHASSIS
4.1 Click the Pram body into the chassis, make sure it clicks in properly and securely.
WARNING Ensure that children are kept away from all moving parts of the pram to avoid risk of injury.
WARNING Always check that the pram body is properly fixed firmly to the chassis before the pram is used and you
put in a child.
(5) REMOVE THE PRAM BODY
5.1 Pull both handles upwards and lift the pram body off the chassis
WARNING Ensure that children are kept away from all moving parts of the pram to avoid risk of injury.
WARNING Never leave a child in the stroller when folding o removing the pram body from the chassis.
WARNING Always hold the frame until the pram body is removed from the chassis.
WARNING Do no use the pram body as a carrycot. Do not carry any children in the pram body when the pram body
is not attached to the chassis.
(6) FOLDING THE PRAM BODY FOR TRANSPORTATION.
6.1 Remove the mattress. Open the press studs on the easy pull handle.
Pull the bar using the easy pull handle along the bottom of the pram body both in the foot end and the
head end. Fold the both connectors inwards.
(7) CONVERT FROM SEAT UNIT TO PRAM BODY
7.1 Press the quick release buttons on the left and right side and remove the Seat release handle.
7.2 Use a hex key (size: 4mm, not included) to remove the connectors on the left and right side.
7.3 Push the hex key through the hole in the fabric lock to release it.
7.4 Then use the Hex-key to pull the fabric holder out from the fabric lock. Repeat on all 3 locks and remove the seat
unit fabric.
7.5 Place the Pram body fabric inside the frame, the pocket shall be placed towards the footrest.
WARNING Never use this product without fully assembling the pram body fabrics onto the frame.
NXT 2in1 v1.0
35
Tabla de contenido
