Troubleshooting - cecotec BOLERO AGUAZERO 1006 COMPACT Manual De Instrucciones

ENGLISH
When not in use for a long time
- We recommend running a washing cycle without any load and, next, disconnect the plug
from the mains supply, close the water supply and leave the door slightly open.
- This will help preserve the door gaskets for more time and will prevent odours forming
inside the device.
Transporting the device
If you want to move the device, try to do so in an upright position. If it is absolutely necessary,
you can place it backwards.
Gaskets
One of the factors that cause odours to form in the dishwasher is food trapped in the gaskets.
Regular cleaning with a damp sponge will prevent this from happening.

9. TROUBLESHOOTING

Problem
The dishwasher does not
turn on
78
Possible causes
The fuse has blown or the
circuit breaker has tripped.
The power supply is not on.
Water pressure is too low.
The dishwasher door is not
properly closed.
Possible solutions
Replace the fuse or restart
the circuit breaker.
Remove any other device
sharing the same circuit as
the dishwasher.
Make sure the dishwasher
is on and door is properly
closed.
Make sure that the power
cord is plugged into the
socket properly.
Check the water supply is
connected properly and it is
not cut off.
Make sure you properly close
the door and it clicks.