cecotec BOLERO AGUAZERO 1006 COMPACT Manual De Instrucciones página 80

ENGLISH
There are rust stains on the
cutlery
Knocking noise in the
dishwasher
Rattling noise in the
dishwasher
Knocking noise on water
hoses
Dishes are not clean
80
The affected items are not
dishwasher safe.
You did not run a programme
after adding salt to the
dishwasher. There were salt
remains in the washing cycle.
The water softener cover is
loose.
The spray arm is hitting an
item in the basket.
The tableware is loose in the
dishwasher.
This may be caused by
the installation or the pipe
section.
You have not loaded them
correctly.
The programme is not
powerful enough.
Not enough detergent has
been dispensed.
There are items blocking the
spray arm movement.
The filtering set is not clean
or not correctly placed in the
bottom of the dishwasher.
This may block the spray
arms holes.
Avoid washing articles which
are not dishwasher safe.
Always run a wash
programme with no load after
adding salt. Do not select
the Turbo* function (if it is
included in your model) after
adding salt to the dishwasher.
Check the water softener
cover is properly closed.
Pause the programme and
place the items blocking the
spray arm again.
Pause the programme and
place the items again.
It does not affect the
dishwasher operation. If you
have any doubts, contact a
qualified plumber.
Read the 'Loading the
dishwasher' section.
Select a more intensive
programme.
Use more detergent or
change the detergent.
Place the items again so the
spray arm can move freely.
Clean and/or place the filter
correctly.
Clean the spray arm holes.