Opaque glass
White spots appear on the
tableware
Black or grey marks on
tableware
There is detergent in the
dispenser
The dishes are not dry.
Warning
Cecotec cannot be held responsible for unprofessional repair as this may cause serious risks
to the safety of the user of the appliance and affect the warranty.
Combination of soft water
and too much detergent.
Areas with hard water may
cause lime deposits.
Aluminium items have
brushed against the
tableware.
The dishes block the
detergent dispenser.
Inadequate load.
You are removing the dishes
too fast.
You have selected an
inadequate programme.
Use of low-quality coated
cutlery.
Use less detergent if you
have soft water and select
a shorter cycle to wash the
items made of glass.
Check the water softener
settings or the salt deposit
filling.
Use a mild abrasive cleaner to
remove these marks.
Load the dishes again
correctly.
Wear gloves if you find
detergent residues on the
dishes to avoid skin irritation.
Do not empty the dishwasher
immediately after the wash.
Open the door slightly to
allow steam to escape. Do not
remove the tableware until
the interior temperature is
safe to the touch.
With a short programme,
the washing temperature is
lower, which decreases the
cleaning performance.
Choose a programme with
longer washing time.
The water draining is more
difficult with these items. The
cutlery or tableware of this
kind cannot be washed in the
dishwasher.
AGUAZERO 1006 COMPACT/SILVER
ENGLISH
81