Emptying The Waste Container - Lavorwash SWL R 1300 Manual De Instrucciones

(Figure 34, pos . E) .
Use the brush movement selector lever (Item 7 Figure 12) bringing it to the central position (all brushes
deactivated) as shown in Figure 34, pos . F .
8.11. SUCTION
To activate or deactivate the suction, with the engine started or only with electrical services activated, turn the
relative switch (Item 12 Figure 12, e Figure 35) .
8.12. FILTER SHAKER
To activate the filter shaker, with the engine started or only the electrical services activated, turn the relative
switch (Item 13 Figure 12) by pressing it in an unstable position for the desired time and releasing it to
deactivate it (Figure 36) .

8.13. EMPTYING THE WASTE CONTAINER

To empty the waste container, with the engine running:
Close the container flap using the relative control lever (Item 15 Figure 12) as shown in box A in Figure 37 .
The light on the indicator (no. 4 Figure 18) comes on to confirm the operation.
Lift the waste container through the control lever (Item 14 Figure 12) lowering it and holding it in that position
until the container reaches the desired position (B, Figure 37) .
Open the container flap by raising the lever so that the waste is released where desired (C, Figure 37) . The light
on the indicator (no. 4 Figure 18) will turn off.
Figure 34
Figure 35
Figure 36
Figure 37
60