TECNOMOTOR TM 514 Manual De Instrucoes página 78

TM 514 – COMMON RAIL TEST
Produzido por Tecnomotor Eletrônica do Brasil S/A - REPRODUÇÃO PROIBIDA - Eventuais erros ou defeitos favor comunicar [email protected]
Selecting the Injector and testing correctly. (Using CommonRailPC Fast
Software)
To select an injector, check the manufacturer's code and the type of test that will
be performed on that injector. This information is usually found on injectors and
compared to the injector table supplied by Tecnomotor.
Also in this table we identify the pressure adapter, electrical adapter and return
adapter according to the device chosen.
Once you have identified the manufacturer, type of injector, press the "F7 - Test"
button.
The screen with the information of the chosen test type, reference or standard will
be displayed. After pressing the "F7 - Test" button, the software will automatically
follow a test sequence unless the operator interrupts the process.
In the following image it is possible to check, on the button "F7 - Start", the time to
start the test.
172