VITO PRO POWER VIGI1250 Manual De Instrucciones página 42

Idiomas disponibles

Idiomas disponibles

Cleaning:
The generator must be thoroughly cleaned after being
used.
Clean the engine by hand (avoid introducing water into the
air filter and exhaust). Avoid wetting the control units and
other equipment/accessories that are difficult to dry. Water
stimulates corrosion and rust on metal elements and
causes damage to electrical equipment.
Do not use strong cleaning agents. These products can
damage plastics and metals and impair the safe operation
of the generator.
Maintenance work:
Only the maintenance work described in these operating
instructions may be carried out, all other work must be
performed by an official dealer.
If you lack the necessary knowledge and means, always
contact an official dealer.
Use only VITO authorized tools or attachable accessories
for this generator or technically identical parts. Otherwise,
injury or damage to the generator may occur. If in doubt,
you should contact an official dealer.
For safety reasons, the fuel components (hoses, tap, tank,
tank cap and connections) should be checked regularly to
detect damage and leaks. If necessary, they should be
replaced by an official dealer.
Always keep warning and indication stickers clean and
legible.
Keep all nuts and screws screwed so that the generator is
in a safe working condition.
If you remove components or safety devices for
maintenance work, they must be replaced immediately and
correctly.
Allow the combustion engine to cool down before placing
the generator in a closed compartment. During operation,
the exhaust gets extremely hot and remains so for a few
minutes after switching off the engine. Avoid touching the
exhaust while it is hot.
Never store the equipment with petrol in the tank inside a
closed space. Petrol vapours that form can come into
contact with flames or sparks and ignite.
Store the generator in a dry place, with the tank empty and
the fuel reserve in a well closed and ventilated
compartment. Avoid areas with high humidity to avoid the
development of corrosion and rust.
If you wish to empty the tank, for example in a period before
winter, the fuel tank should only be emptied outdoors.
Store the generator in an operational mode.
Make sure that the generator is protected against misuse
(e.g. by children).
Your
generator
should
manufacturer's internal service personnel, or other
qualified personnel, replacing any necessary parts with
original parts sourced directly from the manufacturer.
This generator has been factory tested and adjusted. If the
generator does not produce power at the correct voltage,
consult authorized service technicians.
▪ The rated power, is the power that the generator can
provide during continuous operation;
▪ The maximum power, is the power that the generator can
supply for a short period of time;
▪ Many electrical equipment requires more power than
indicated in the technical specifications, during the
engines start-up or stop. When the equipment needs
this extra power, the generator provides the necessary
energy, for a short period of time.
Check the maximum power of the equipment before
plugging it to the generator. If the power is greater than the
generator's maximum power, do not connect it to the
generator.
only
be
serviced
by
the
loading

Este manual también es adecuado para:

Pro-power vigi2000