Idiomas disponibles
Idiomas disponibles
The generator produces enough electrical energy to
cause electric shock which is capable of causing
damage and injury to the user in case of misuse.
Do not use the generator or electrical equipment in
damp environments, such as rain or snow, near
swimming pools or irrigation systems, with wet hands.
These actions may result in electrocution. Keep the
generator dry.
If the generator is stored outdoors without any protection
against
weather
conditions,
components on the control panel before each use. Moisture
or ice can cause malfunction and short circuit in the
electrical components which can result in electrocution.
The protection against electric shocks depends on the
circuit breaker installed in the generator control panel. If
the circuit-breaker has to be replaced, contact the dealer
to replace the circuit-breaker with one with the same
properties.
Use only insulated extension cords, with electrical cables
suitable for the equipment power. If using cables with a 1.5
mm2 nominal section, the length of the extension cord
should not exceed 60m, if the nominal section is 2.5 mm2,
it should not exceed 100m.
Do not carry the generator with the combustion engine
running. Before transporting, switch off the combustion
engine and remove the spark plug cap from the spark plug.
Transport the machine only when the combustion engine is
cold and without fuel.
When carrying the generator, regional legislation in force
must be respected, in particular the ones concerning the
cargo's protection and the transport of objects on cargo
surfaces.
Ensure the generator is only used by users who have
familiarized themselves with the instruction manual.
Before switching on the generator, check the leak-
tightness of the fuel system, particularly the visible
parts such as (tank, tank cap and hose couplings) and the
hydraulic system (hydraulic hoses and couplings). In case
of leakage or damage, do not start the combustion engine
and request the repair of the machine from an official
dealer.
check
all
electrical
Before using the generator, replace defective parts as well
as all other used and damaged parts.
Check that all nuts and screws are properly screwed. It is
important to check regularly the generator to ensure safety
and a good performance.
Before using the generator, check that the spark plug is
properly connected to the spark plug cap.
Make all adjustments and work necessary for the correct
assembly of the generator. If you have any questions or
difficulties, contact your official dealer.
To ensure that you work with the generator safely, before
starting up, it is necessary to check that:
▪ The whole generator is assembled correctly;
▪ The safety devices are in perfect condition and working
properly. Never use the generator if the safety devices
are missing, damaged or worn out;
▪ The fuel tank, fuel transmission components and the
tank cap are in perfect condition;
Take into account the municipal regulations about the
hours when it is allowed to use devices with combustion
engines.
Keep third parties away from the operating area. Never
work while animals or people, particularly children,
are in the danger zone.
The exhaust system reaches high temperatures that can
cause ignition in some materials. Keep flammable
materials away from the generator.
Keep the generator at least 1 m away from frames, buildings
and other equipment during operation. Do not attach the
generator to any structure.
Use the generator with special care when working near
slopes, ditches and wells. Place the generator on a firm, flat
floor at a safe enough distance from these danger zones.
