Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Translation of the Original Operating Instructions
The pump must be supplied through a residual current device
(RCD) having a rated residual operating current not exceed-
ing 30mA.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.
Disconnect the device from the power supply and let it cool
down before cleaning and maintenance is performed and be-
fore the device is stored.
Always protect electrical parts against moisture. During clean-
ing or operation, they must not be immersed in water or other
liquids to ensure that an electrical shock is prevented. Never
hold the device under running water. Please follow the in-
structions of "Maintenance and troubleshooting".
Notes and instructions with the following symbols require par-
ticular attention:
Any nonobservance of these instructions involves the
danger of bodily harm to people and/or damage to
property.
Any nonobservance of this instruction bears the risk
of an electrical shock which may cause damage to
persons or property.
Please inspect the device for damage occurred during transportation. In case of
damage, the retailer has to be informed immediately, at the latest within 8 days
after the date of purchase.
2. Technical Data
Model
Mains voltage / frequency
Nominal performance
Protection type
Suction port
Pressure port
Max. flow rate (Qmax)
1)
HWA 6000 EPF
230 V~ 50 Hz
1,500 Watt
IPX4
39.59 mm (1 ¼" female)
30.93 mm (1" female)
6,000 l/h
2
19
Tabla de contenido
