Additional Safety Information; Hearing Protection - Stanley PB2500N NeoBolt Manual De Instrucciones

E N G L I S H
g ) Use the power tool, accessories and tool bits, etc. in accordance with these instructions, taking into
account the working conditions and the work to be performed. Use of the power tool for operations
different from those intended could result in a hazardous situation.
h ) Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and control of the tool in unexpected situations
1.1.5 BATTERY TOOL USE AND CARE
a ) Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with another battery pack.
b ) Use power tools only with specifically designated battery packs. Use of any other battery packs may
create a risk of injury and fire.
c ) When battery pack is not in use, keep it away from other metal objects like paper clips, coins, keys,
nails, screws or other small metal objects that can make a connection from one terminal to another.
Shorting the battery terminals together may cause burns or a fire.
d ) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or burns.
e ) Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may
exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature
f )
above 130 °C may cause explosion.
g ) Follow all charging instructions and do not charge the battery pack or tool outside the temperature
range specified in the instructions. Charging improperly or at temperatures outside the specified range
may damage the battery and increase the risk of fire.
1.1.6 SERVICE
a ) Have your power tool serviced by a qualified repair person using only identical replacement parts.
This will ensure that the safety of the power tool is maintained.
b ) Never service damaged battery packs. Service of battery packs should only be performed by the
manufacturer or authorized service providers.

1.1.7 ADDITIONAL SAFETY INFORMATION

WARNING: NEVER modify the tool in any way. Any modification to the tool will void any and all
warranties. Modification may pose a risk of property damage and/or serious risk of injury to the user.
WARNING: ALWAYS use safety glasses. Everyday eyeglasses are NOT safety glasses. Also use face or
dust mask if installation operation is dusty. ALWAYS WEAR CERTIFIED SAFETY EQUIPMENT:
• Eye protection
•

Hearing protection

• Respiratory protection
WARNING: Always wear proper personal hearing protection during use. Under some conditions
and duration of use, noise from this product may contribute to hearing loss.
CAUTION: When not in use, place tool on its side on a stable surface where it will not cause a
tripping or falling hazard. Some tools with large battery packs will stand upright on the battery
pack but may be easily knocked over. Some tools with large battery packs will stand upright on the
battery pack but may be easily knocked over.
• Do not use outside the design intent of placing STANLEY Engineered Fastening NeoBolt® Fasteners.
• Use only parts, fasteners, and accessories recommended by the manufacturer.
• DO NOT abuse the tool by dropping or using it as a hammer.
• Keep tool handles dry, clean, and free from oil and grease.
• Never leave operating tool unattended and disconnect battery when tool is not in use.
• Keep hands away from trigger before connecting to power source and/or battery pack, picking up or
carrying the tool.
4