Black and Decker BEPW2000 Manual De Instrucciones página 9

Ocultar thumbs Ver también para BEPW2000:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

2. Point the spray wand 
trigger 
 7 
to release remaining water pressure.
3. When the spray wand is completely empty, lift the
pressure washer by the handle 
washer using the retractable handle 
Shutdown (Fig. A)
1. Turn OFF the pressure washer unit 
OFF switch 
 9 
to the OFF position. Then turn OFF the
water supply and unplug the cord from the outlet.
2. Discharge residual pressure by squeezing the trigger 
until no more water comes out of the spray wand 
3. Engage the spray trigger lock‑off 
4. Disconnect the garden hose from the water intake 
5. Disconnect the high pressure hose 
pressure water outlet 
MAINTENANCE

WARNING: To reduce the risk of serious personal
injury, turn unit off and disconnect it from
power source before making any adjustments or
removing/installing attachments or accessories.
An accidental start‑up can cause injury.
Your BLACK+DECKER power tool has been designed to
operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends
upon proper tool care and regular cleaning.
Cleaning

WARNING: Blow dirt and dust out of all air vents with
clean, dry air at least once a week. To minimize the risk
of eye injury, always wear ANSI Z87.1 approved eye
protection when performing this procedure.

WARNING: Never use solvents or other harsh
chemicals for cleaning the non‑metallic parts of the
tool. These chemicals may weaken the plastic materials
used in these parts. Use a cloth dampened only with
water and mild soap. Never let any liquid get inside the
tool; never immerse any part of the tool into a liquid.
Nozzle Cleaning (Fig. A, G)
If the nozzle becomes clogged with foreign materials, such as
dirt, excessive pressure may develop. If the nozzle becomes
partially clogged or restricted, the pump pressure will pulsate.
Clean the nozzle immediately using the nozzle cleaner.
1. Turn OFF and unplug the pressure washer unit 
2. Turn OFF the water supply.
3. Pull trigger 
 7 
on spray handle 
water pressure.
4. Remove the nozzle from the spray wand 
the quick connect collar 
5. Using the nozzle cleaning tool 
from the nozzle.
6. Run water from a faucet or garden hose through
the nozzle.
Storage (Fig. H, I)
Store in a dry, covered location above freezing
temperature. sTORE inDOORs.
 2 
in a safe direction and pull the
 10 
or wheel the pressure
 22 
.
 8 
by rotating the ON/
 6 
.
 1 
from the high
 12 
and drain hose.
 4 
to relieve any
by pulling
 2 
 3 
toward the spray wand.
 13 
, unclog any debris
Always completetely empty water from high pressure
hose, pressure washer unit, nozzles, and spray wand.
Nozzles can be stored in the handle as shown in Figure H.
Power cord can be stored coiled up around the pressure
washer unit, secured on the cord retaining hooks 
shown in Fig. I.
High pressure hose can be stored coiled up and secured
to the handle using the supplied hook and latch
strap 
 26 
Accessories
 7 

 2 
.
WARNING: Since accessories, other than those offered by
BLACK+DECKER, have not been tested with this product,
use of such accessories with this tool could be hazardous.
 11 
.
To reduce the risk of injury, use only BLACK+DECKER
accessories recommended for this product.
Recommended accessories for use with your tool are
available at extra cost from your local dealer or authorized
service center. If you need assistance in locating
any accessory, please contact BLACK+DECKER call
1‑800‑544‑6986.
Repairs

WARNING: To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (including
power cord repairs, and brush inspection and
replacement, when applicable) should be performed
by a BLACK+DECKER factory service center or a
BLACK+DECKER authorized service center. Always use
identical replacement parts.
Register Online
Thank you for your purchase. Register your product now for:
• WARRAnTY sERViCE: Registering your product will
help you obtain more efficient warranty service in case
there is a problem with your product.
• COnFiRMATiOn OF OWnERshiP: In case of an
insurance loss, such as fire, flood or theft, your registration
of ownership will serve as your proof of purchase.
• FOR YOUR sAFETY: Registering your product will
allow us to contact you in the unlikely event a safety
notification is required under the Federal Consumer
Safety Act.
• Register online at www.BlackandDecker.com/
NewOwner
 8 
.
TWO‑YEAR LIMITED WARRANTY
Black & Decker (U.S.) Inc. warranties this product to be free
from defects in material or workmanship for a period of
two (2) years following the date of purchase, provided that
the product is used in a home environment. This limited
warranty does not cover failures due to abuse, accidental
damage or when repairs have been made or attempted
by anyone other than BLACK+DECKER and its Authorized
Service Centers. A defective product meeting the warranty
conditions set forth herein will be replaced or repaired at no
charge in either of two ways:
The first, which will result in exchanges only, is to return
the product to the retailer from whom it was purchased
as shown in Fig. I.
English
 16 
as
7
Tabla de contenido
loading

Tabla de contenido