Tabla de contenido
5. Headgear assembly:
• Headgear with arms
a. Push the end of the right headgear arm (marked with an "R")
through the right mask frame loop. Repeat on the left side with the
left ("L) headgear arm and left frame loop.
b. Slide the fabric tabs into the slots on the arms and fold backwards.
Note: Once the mask is on, the letters should face outward with the
"L" on the left side of your head and the "R" on the right side.
• Headgear
backwards.
Note: The Philips Respironics logo will be on the outside and facing up
when correctly assembled.
Disassembly
1. Headgear disassembly:
• Headgear with arms
mask frame loop.
• Headgear
the mask frame.
2. Undo the strips on the fabric sleeves and remove from the mask frame.
3. Pull the tubing quick release from the elbow.
4. Pull the elbow from the top of the frame.
5. Pull the cushion from the mask frame.
A1
A1
:
A2
: Slide the tabs into the slots on the mask frame and fold
A1
: Gently pull each headgear arm out of the
A2
: Undo the headgear tabs and pull through the slots in
A2
9
Tabla de contenido
