Petsafe Classic In-Ground Fence Manual De Instrucciones página 14

6 Prepare the transmitter
1. Plug the transmitter power adaptor into the outlet and connect it
to the transmitter.
2. Press the power button on the transmitter to turn it on.
The LCD screen on the transmitter will turn on and display the
boundary distance.
If you hear an audible alarm and the transmitter LCD screen is
flashing and displaying the wire break warning icon, it means
the transmitter is unable to detect a continuous loop of boundary
wire. (See Troubleshooting on page 25.)
14
3. Set the boundary distance to 3.0 metres:
• To decrease the boundary distance, press the - button.
• To increase the boundary distance, press the + button.
The boundary distance is the distance the radio signal travels
from the boundary wire; it is adjustable from 0.6-4.5 metres. The
boundary width is twice the boundary distance.