Lighting
The lighting can be switched on and off
independently of the ventilation.
@
Press the
button.
Setting the brightness
@
Press and hold the
button until the desired
brightness is reached.
Saturation notification
After 30 hours of operation, the saturation display
of the grease filter blinks.
▯
At the latest now the metal mesh grease filter
should be cleaned. For instructions on how to
clean the metal mesh grease filter, please see
Cleaning and maintenance
the chapter about
▯
While the saturation display is blinking, it can be
œ
reset with the
button.
Cleaning and maintenance
9
WARNING
Risk of burns
The appliance will become hot when in use,
especially in the area surrounding the bulbs.
Let cool before cleaning.
9
WARNING
Risk of electric shock
Penetrating damp can cause electric shock.
Only clean appliance with a damp cloth. Prior
to cleaning, pull the plug or flip the breaker in
the fusebox.
9
WARNING
Risk of electrical shock
Moisture entering the appliance can cause an
electrical shock. Don't use a high-pressure
cleaner or steam cleaner.
10
9
WARNING
Risk of injury
Components inside the appliance may have
sharp edges. Wear protective gloves.
Cleaning agents
To prevent various surfaces from becoming damaged
due to incorrect cleaning agents, follow the
specifications given in the table. Do not use
œ
▯
cleaning agents that are harsh or scouring,
▯
cleaning agents with high alcohol content,
▯
hard scouring pads or sponges,
▯
high-pressure cleaners or steam cleaners.
.
Thoroughly rinse all new sponges before use.
Observe all instructions and warnings accompanying
cleaning agents.
Area
Stainless steel
Varnished sur-
faces
Aluminum and
plastic
Glass
Controls
Cleaning agents
Warm soapy water:
Clean with a dish rag and dry with a
soft towel.
Only clean stainless steel with the
grain.
Specific products for stainless steel
care are available from customer ser-
vice or from specialized retailers.
Apply a thin layer of the care product
with a soft cloth.
Warm soapy water:
Clean with a damp dish rag and dry
with a soft towel.
Do not use stainless steel cleaner.
Glass cleaner:
Clean with a soft cloth.
Glass cleaner:
Clean with a soft cloth. Do not use a
glass scraper.
Warm soapy water:
Clean with a damp dish rag and dry
with a soft towel.
Risk of damage to electronics due to
permeating damp. Never clean
controls with a wet cloth.
Do not use stainless steel cleaner.