Sbm - Sicam SBM 855 Manual Original

Máquina de equilibrado de ruedas
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 92
3.5

SBM 855

12
11
13
1
2
10/2
3
Fig. 1:
SBM 855
Item Designation
1
On/off switch
2
Clamping tool holders
3
Power cord
4
Tray
5
Control/display panel
6
Vernier caliper
7
Wheel guard
8
Quick-action clamping nut
9
Centering flange
10
Wheel lift
10/1 Wheel lift slide
10/2 Pedal
11
Manual vernier caliper
12
Measuring compasses
13
Service unit with com-
pressed air connection
Sicam snc società unipersonale
5
6
4
9
Functions
Switch-on and switch-off
For storing accessories
For power connection
For storing balance weights and accessories
+ Operation of SBM 855, refer to Section 7
+ Software display (measured values and operating instructions)
+ Recording of rim distance and rim diameter.
+ Determination of positions for attachment of adhesive weights.
+ Protection of operator against flying particles (e. g. dirt, water)
+ Starting and stopping measurement
Centering and attachment of wheel on cone
Wheel attachment.
Lifting device to assist with attachment and removal of wheel
Horizontally adjustable wheel rest
+ Left pedal: Raises the wheel rest
+ Right pedal: Lowers the wheel rest
Can be used as substitute if the electronic vernier caliper is defective.
Can be used as substitute if the rim width and rim diameter cannot be recorded electronically.
+ Checking/adjustment of operating pressure.
+ Removal of dirt.
+ Oil supply for compressed air system.
Product description | SBM 855 | 29
7
8
10
10/1
en
|
656 229
2010-11-22
Tabla de contenido
loading

Tabla de contenido